Fuel Level Sensor 2 -G169-, Checking: Procedure

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seats all the way forward.

-- Switch off the ignition.

-- Remove the rear bench seat. Refer to BENCH SEAT/SINGLE SEAT, REMOVING AND INSTALLING .

-- Unclip the right sealing flange cover -1- at the tabs in direction of -arrows- using the :3409 .

Courtesy of AUDI OF AMERICA, LLC

VERSION 1:

Courtesy of AUDI OF AMERICA, LLC

-- Unlock the connector safety catch and disconnect the connector -2- on the right sealing flange.

NOTE:

Ignore -1-.

VERSION 2:

Courtesy of AUDI OF AMERICA, LLC

-- Release the connector safety catch to disconnect the connector -1- on the right sealing flange.

NOTE:

Ignore -2-.