Overview - EVAP System
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Connecting Hose
- From air filter to pressure regulating valve
- Hose Clamps
- Pressure Regulator Valve
- With Fuel Tank Pressure Sensor -G400-
- Bolts
- 2.5 Nm
- Evaporative Emission (EVAP) Canister
- Component location: behind the wheel housing liner inside right rear wheel housing
- Removing and installing. Refer to EVAP CANISTER, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Breather Line
- To the fuel tank
- Breather Line
- To EVAP Canister Purge Regulator Valve 1 -N80-
- Bolt
- 2.5 Nm
- Air Filter