EVAP Canister, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Observe the safety precautions.
-- Follow the rules for clean working conditions.
-- Remove the right rear wheel. Refer to the appropriate service information .
-- Remove the right rear wheel housing liner. Refer to REAR WHEEL HOUSING LINER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the breather lines -2 and 3- from the Evaporative Emission (EVAP) Canister.
-- Remove the bolt -arrow-.
-- Using a screwdriver, lightly push the retainer -A- toward the luggage compartment.
-- Pull the EVAP canister downward from the guide bracket and remove.