Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove The Steering Column Cover. Refer to STEERING COLUMN COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -2- from the accelerator pedal module, to do so press the release upward.
Fig 1: Accelerator Pedal Position Sensor -G79- / Accelerator Pedal Position Sensor 2 -G185- Component Location
-- Remove the bolt -1-.
-- Remove the accelerator pedal module -3- from the mounting.