Overview - SUBFRAME Mount, Vehicles With Manual Transmission 02Q And Dual-Clutch Transmission 0CW/0D9
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Subframe Mount, Vehicles With Manual Transmission 02Q And Dual-Clutch Transmission 0Cw/0D9
- Engine Support
- Removing and installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
- Always replace
- Engine Mount
- With support arm
- Removing and installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
- Bolt
- 40 Nm +90°
- Always replace
- Bolt
- 20 Nm +90°
- Always replace
- Bolt
- 8 Nm
- Bracket
- Bolt
- 60 Nm +90°
- Always replace
- Pendulum Support
- There are different versions. Refer to the Parts information for the allocation.
- Removing and installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
- Bolt
- Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
- Always replace
- Bolt
- Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
- Always replace
- Bolt
- Tightening specification and sequence. Refer to INSTALLING THE PENDULUM SUPPORT .
- Always replace
- Bolt
- 60 Nm +90°
- Always replace
- Bolt
- 60 Nm +90°
- Always replace
- Bolt
- 50 Nm + 90°
- Always replace
- Transmission Mount
- With support arm
- Removing and installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
- Transmission Support
- There are different versions. Refer to the Parts information for the allocation.
- Bolt
- Tightening specification. Refer to SUBFRAME MOUNT [For transmission(s) 0D9] .