Engine, Supporting In Installation Position: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the plenum chamber cover -5-. Refer to BULKHEAD .
-- Remove the engine cover. Refer to ENGINE COVER .
-- Vehicles with a 1.8L engine: release the retainer in direction of -arrow- and remove the engine cover mount -1-.
-- Remove the caps over the front suspension strut threaded connections.
-- Position the :10-222A/31-1 and :10-222A/31-2 onto the mounts for the suspension struts.
- The ribs -arrow- face the direction of travel.
-- Position the :10-222A/4 with the :T40091/3 as shown.
-- Install the additional tools on the left in the engine compartment as shown.
-- Engage the carabiner hook of the :10-222A/11 at the left engine lifting eye -arrow-.
-- Slightly pretension the engine/transmission assembly with the spindle, do not lift.