Engine And Transmission, Separating, Vehicles With Manual Transmission 02Q: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

Engine/transmission assembly removed and mounted on :T10359A .

-- Remove the starter. Refer to STARTER .

-- Remove the bolts -1 and 2- and remove the bevel box bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and remove the transmission support.

Courtesy of AUDI OF AMERICA, LLC

-- Install the :T40013 on the transmission and close the retainer.

Courtesy of AUDI OF AMERICA, LLC

-- Engage the :VAS6100 with :10-222A/2 on the transmission lift hook.

-- Remove the bolts -1, 2, 5, 6, 7 and 8- connecting the transmission to the engine.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the transmission from the engine. Pay attention to the intermediate plate while doing so.