LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (ENGINE ASSEMBLY (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 10 Engine Assembly >> Engine, Removing And Installing >> Engine And Transmission, Separating >> Engine And Transmission, Separating, Vehicles With Dual-Clutch Transmission 0D9 >> Procedure

Engine And Transmission, Separating, Vehicles With Dual-Clutch Transmission 0D9: Procedure

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA27-10193Courtesy of AUDI OF AMERICA, LLC

-- Remove the starter. Refer to STARTER .

-- Remove the nut -arrows- and remove the front bracket from the transmission fluid pan.

GWWA34-11073Courtesy of AUDI OF AMERICA, LLC
NOTE:

The threaded bolts are welded to the front of the oil pan.

scientia non olet · About LEMON Manuals