Engine And Transmission, Separating, DSG® Transmission 0CW: Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Engine/transmission assembly removed and mounted on :T10359A .
-- Free up the wires from the bracket -arrow-.
-- Remove the bolts -1 and 2- and then remove the starter from the transmission.
-- Free up the wiring harness -1 and 2- from the air duct pipe.
-- Loosen the screw-type clamp -4-.
-- Remove the bolts -arrows- and remove the air duct pipe.
-- Secure the transmission to the :VAS6100 using the :10-222A/12 .
-- Remove the bolts -1 to 8- for the transmission/engine connection.
-- Remove the transmission from the engine.