LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (EXHAUST SYSTEM, EMISSION CONTROLS (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Muffler, Removing And Installing >> Muffler, Removing And Installing, Fwd Vehicles >> Removing

Muffler, Removing And Installing, Fwd Vehicles: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear tunnel brace -2-. Refer to UNDERBODY TRIM PANEL .

GWWA66-11057Courtesy of AUDI OF AMERICA, LLC

-- Loosen the clamping sleeve -arrow- and push it toward the rear.

GWWA26-11256Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -2- from the exhaust system rear section.

GWWA26-11275Courtesy of AUDI OF AMERICA, LLC
WARNING:

Risk of accident due to the weight of the muffler.

  • A second technician is required to remove the rear muffler.

-- Remove the bolts -3- left and right as well as bolt -4- and remove the muffler -1-.