LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (EXHAUST SYSTEM, EMISSION CONTROLS (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Muffler, Removing And Installing >> Muffler, Removing And Installing, AWD Vehicles >> Removing

Muffler, Removing And Installing, AWD Vehicles: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Loosen the threaded connections for the front clamping sleeve -arrow-.

GWWA26-11354Courtesy of AUDI OF AMERICA, LLC

Vehicles with 2.0L Engine:

GWWA26-11319Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the left and right connector -3- from the exhaust door control unit -2-.

A3 Cabriolet: 

GWWA42-10540Courtesy of AUDI OF AMERICA, LLC

-- Remove the corresponding diagonal brace. Refer to SUBFRAME .

Continuation for All Vehicles:

GWWA26-11353Courtesy of AUDI OF AMERICA, LLC

-- Disengage the mounting -3- from the exhaust system rear section.

WARNING:

Risk of accident due to the weight of the muffler.

  • A second technician is required to remove the rear muffler.

-- Remove the bolts -1 and 2- and then remove the muffler.