LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 29 (EXHAUST SYSTEM, EMISSION CONTROLS (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 26 Exhaust System, Emission Controls >> Exhaust Pipes/Mufflers >> Exhaust System, Installing Without Tension >> Tail Pipes, Aligning >> Procedure

Tail Pipes, Aligning: Procedure

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Align the rear muffler so that the space between the opening for the bumper and the tail pipes is the same.

Vehicles with 1.8L Engine: 

GWWA26-11350Courtesy of AUDI OF AMERICA, LLC

Vehicles with 2.0L Engine: 

GWWA26-11357Courtesy of AUDI OF AMERICA, LLC

-- Loosen the rear muffler to align the tail pipes.

scientia non olet · About LEMON Manuals