Exhaust Pipes/Mufflers, Separating, AWD Vehicles: Procedure
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
-- Separate the exhaust pipe at a right angle at the separating point -arrow- using a :VAS6254 .
-- When installing, position clamping sleeve -arrows- centrally on the separation point.
-- Install the rear clamping sleeve. Refer to INSTALLATION POSITION FOR REAR CLAMPING SLEEVE .
-- Install the exhaust system without tension. Refer to EXHAUST SYSTEM, INSTALLING WITHOUT TENSION .