Upper Timing Chain Cover, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

The engine is cold.

-- Briefly open the coolant reservoir cap -arrow- to reduce the residual pressure in the coolant system.

Courtesy of AUDI OF AMERICA, LLC

-- Vehicles with a left auxiliary radiator: remove the filler neck -2- for the windshield washer fluid reservoir. Refer to WINDSHIELD WASHER SYSTEM .

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the hose clamps -1-, remove the coolant hose and push to the right side.

Courtesy of AUDI OF AMERICA, LLC

-- Seal the open lines and connections with clean plugs from the :VAS6122 .

-- Press the release button on the EVAP canister hose -2-, remove the hose and free it up.

All additional procedures are described. Refer to TIMING CHAIN COVER .