LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 28 (CYLINDER HEAD, VALVETRAIN (4-Cylinder Direct Injection 1.8L; 2.0L 4V TFSI Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> Cylinder Head >> Cylinder Head, Removing And Installing >> Installing

Cylinder Head, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Additional procedures:

-- Install the front exhaust pipe with the catalytic converter. Refer to CATALYTIC CONVERTER, REMOVING AND INSTALLING .

-- Install the Heated Oxygen Sensor -G39-. Refer to HEATED OXYGEN SENSOR .

scientia non olet · About LEMON Manuals