Transmission Fluid, Filling

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Oil Filling Adapter - VAS 6262 A-

Courtesy of AUDI OF AMERICA, LLC

-- Shake the container before opening.

-- Attach the transmission fluid container to the : VAS6262A .

-- Install the : VAS6262A into the opening for the drain and check plug -arrow 1- hand-tight.

Courtesy of AUDI OF AMERICA, LLC

-- Hold the container with the : VAS6262A as high as possible over the transmission and fill the transmission with approximately 5.2 liters (5.5 qts) of transmission fluid.

-- Shift the selector lever into "P" and push the parking brake button to activate the electro-mechanical parking brake.

-- Press the brake pedal and hold it down.

-- Start the engine and let it run in idle.

-- With the brake pressed, shift through all selector lever positions "P, R, N, D/S" at idle, retaining each position for at least 3 seconds.

-- Move the selector lever into "P" position.

-- Check the transmission fluid level. Refer to TRANSMISSION FLUID LEVEL, CHECKING .