Camshaft Adjustment Valve 1 -N205-, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and Note The Following:
- Replace the seals and O-rings after removal.
-- Oil the O-rings on the sealing surface to the valve for the camshaft adjustment with engine oil.
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .