Timing Chain Cover, Removing And Installing, Engine With Two Camshaft Adjusters: Installing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- Replace the seals and O-rings after removal.
-- Coat the seals and the O-rings with engine oil.
- Seal installation position: smaller inner diameter outward.
-- Install the camshaft adjustment valves. Refer to CAMSHAFT ADJUSTMENT VALVE 1 -N205-, REMOVING AND INSTALLING .
Additional procedures depending on the model. Refer to TIMING CHAIN COVER, REMOVING AND INSTALLING [CNSB, CNTC, & CYFB] .