Oil Pan Upper Section, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING [For transmission(s) 0D9] .

Depending on the model, preliminary work may be required. Refer to OIL PAN UPPER SECTION, REMOVING AND INSTALLING .

-- Remove the transmission side sealing flange. Refer to SEALING FLANGE, REMOVING AND INSTALLING, TRANSMISSION SIDE .

-- Remove the oil pump. Refer to OIL PUMP, REMOVING AND INSTALLING .

-- Disconnect the connector -1- for the Oil Pressure Regulation Valve -N428-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

Courtesy of AUDI OF AMERICA, LLC

Version 1

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 to 14- and loosen the oil pan upper section from the bonding.

First pry the oil pan upper section out on the transmission side. When prying out proceed carefully - risk of damaging the timing chain cover.

Version 2

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 to 18- and loosen the oil pan upper section from the bonding.

First pry the oil pan upper section out on the transmission side. When prying out proceed carefully - risk of damaging the timing chain cover.