LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (LUBRICATION [4-Cylinder 2.0L 4V TFSI Engine] -- (A3 SEDAN)) >> 17 Lubrication >> Oil Pan/Oil Pump >> Oil Pan Lower Section, Removing And Installing >> Removing

Oil Pan Lower Section, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Disconnect the connector -1- for the Oil Level Thermal Sensor -G266-.

GWWN34-10504Courtesy of AUDI OF AMERICA, LLC

Vehicles with Plastic Oil Pan Lower Section 

GWWA17-11138Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 20-.

-- Remove the oil pan lower section.

Vehicles with Metal Oil Pan Lower Section: 

GWWA17-10270Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1 through 20-.

-- Carefully loosen the oil pan lower section from the bond.

Continuation: 

-- If the oil pan lower section is replaced, remove the Oil Level Thermal Sensor -G266-. Refer to Oil Level Thermal Sensor -G266-, REMOVING AND INSTALLING .