LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (LUBRICATION [4-Cylinder 2.0L 4V TFSI Engine] -- (A3 SEDAN)) >> 17 Lubrication >> Crankcase Ventilation >> Oil Separator, Removing And Installing >> Removing

Oil Separator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2017 Audi A3 Quattro, 2016 Audi S3, and 2016 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the cylinder ignition coils "3 and 4". Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .

-- Loosen the hose clamp -1- and remove the hose from EVAP Canister Purge Regulator Valve 1 -N80-.

-- Remove the bolt -2- and then remove the crankcase ventilation hose -3- from oil separator.

-- Remove the bolts -arrows- and the oil separator.

scientia non olet · About LEMON Manuals