Sealing Flange, Removing And Installing, Transmission Side: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- The transmission is removed. Refer to TRANSMISSION, REMOVING AND INSTALLING .
-- Remove the flywheel. Refer to FLYWHEEL, REMOVING AND INSTALLING .
-- Disengage the sealing flange on the alignment sleeves and on the sealing flange -arrows-.
-- Remove the bolts -1 through 8-. (There is also equipment with only six bolts depending on the version).
-- Loosen the sealing flange from the bond and then remove it.