Ribbed Belt, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2017 Audi S3, 2017 Audi A3 Quattro, 2016 Audi S3, 2016 Audi A3 Quattro, and 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the noise insulation. Refer to NOISE INSULATION .
CAUTION:
- Mark the running direction before removal.
- Pay attention to the running direction when reinstalling.
-- Mark the running direction using chalk or a felt-tip pen.
-- Turn the tensioner in direction of -arrow- to release the tension on the ribbed belt.
-- Secure the tensioner using the :T10060A .
-- Remove the ribbed belt.