Overview - EGR Motor -V338-
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Coolant Hoses
- Spring Clamp
- EGR Motor -V338-
- With the EGR Potentiometer -G212-
- Removing and installing. Refer to EGR MOTOR -V338-, REMOVING AND INSTALLING .
- After replacing the EGR Motor -V338- the adaptation values must be reset.
- Select 01 - On Board Diagnostic (OBD) Capable Systems
- 01 - Engine Electronics
- 01 - Engine Electronics, Functions
- 01 Adapting the electric actuator with feedback
- Seal
- Always Replace After Removing
- Seal
- Always Replace After Removing
- Bolt
- 9 Nm