EGR Motor -V338-, Removing And Installing: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the Throttle Valve Control Module -J338-. Refer to THROTTLE VALVE CONTROL MODULE -J338-, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Clamp off the coolant hoses with :3094 .
-- Loosen the clamp -2- and remove the coolant hose.
-- Remove the screws -arrows- and the EGR Motor -V338-.