LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (EXHAUST SYSTEM (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 26 Exhaust System >> Exhaust Gas RECIRCULATION >> EGR Motor -V338-, Removing And Installing >> Installing

EGR Motor -V338-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and Note The Following: 

-- Replace all seals.

-- Bleed the cooling system. Refer to COOLANT CIRCUIT FILLING AND BLEEDING: .

-- After replacing the EGR Motor -V338- the adaptation values must be reset.

Use the Vehicle Diagnostic Tester.

scientia non olet · About LEMON Manuals