Overview - Accelerator Pedal Mechanism
WARNING: This page is about a different car, the 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Bolt
- 6 Nm
- Connector
- Make sure it is attached securely
- Accelerator Pedal Module
- With Accelerator Pedal Position Sensor -G79- and Accelerator Pedal Position Sensor 2 -G185-
- Removing and installing. Refer to ACCELERATOR PEDAL POSITION SENSORS -G79- / -G185-, REMOVING AND INSTALLING .
- Depending on the engine/transmission version, adaption in the "Guided Functions" operating mode is necessary after replacing it. Perform the adaption, if a menu item is available in the "Guided Functions". Refer to Vehicle Diagnostic Tester