LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 17 (FUEL SUPPLY (2 Of 2) -- (A3 SEDAN)) >> 20 Fuel Supply >> Accelerator Pedal Mechanism >> Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing >> Installing

Accelerator Pedal Position Sensors -G79- / -G185-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal.Note The Following: 

CAUTION:

There is a risk of causing damage to the surface of the knee airbag due to mechanical stress.

  • After performing work visually inspect that the surface of the knee airbag is undamaged.

-- Install the steering column cover. Refer to STEERING COLUMN, REMOVING AND INSTALLING .

-- Depending on the engine/transmission version, adaption in the "Guided Functions" operating mode is necessary after replacing it. Perform the adaption, if a menu item is available in the "Guided Function". Refer to Vehicle Diagnostic Tester.