Overview - Coolant Pump/Thermostat
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- O-rings
- Always replace after removing
- Coat with coolant
- Connecting Piece
- O-ring
- Always replace after removing
- Coat with coolant
- Lower Front Coolant Pipe
- Removing and installing. Refer to LOWER FRONT COOLANT LINE, REMOVING AND INSTALLING .
- Seal
- Always replace after removing
- O-ring
- Always replace after removing
- Coat with coolant
- Coolant Pump
- Removing and installing. Refer to COOLANT PUMP, REMOVING AND INSTALLING .
- O-rings
- Always replace after removing
- Coat with coolant
- Bolt
- 8 Nm
- Cylinder Head Coolant Valve -N489-
- Removing and installing. Refer to CYLINDER HEAD COOLANT VALVE -N489-, REMOVING AND INSTALLING .
- Bolt
- 20 Nm +45°
- Always replace after removing
- Clamp
- Make sure it is secure
- Clamp
- Make sure it is secure
- O-ring
- Always replace after removing
- Coat with coolant
- Seal
- Always replace after removing
- Bolt
- 20 Nm
- Coolant Thermostat Housing
- O-ring
- Always replace after removing
- Coat with coolant
- Coolant Thermostat
- Removing and installing. Refer to COOLANT THERMOSTAT, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Connecting Piece