LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (COOLING SYSTEM (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 19 Cooling System >> Coolant Pump/Thermostat >> Electric Coolant Pump, Removing And Installing >> Heater Support Pump -V488-, Removing And Installing >> Installing

Heater Support Pump -V488-, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install In Reverse Order Of Removal.Note The Following: 

CAUTION:

- The coolant system must be bled using the Vehicle Diagnostic Tester after filling.

-- Bleed the cooling system. Refer to COOLANT, DRAINING AND FILLING WITHOUT COOLING SYSTEM CHARGE KIT - ELECTRIC VACUUM PUMP:VAS6096/2 .

scientia non olet · About LEMON Manuals