Overview - Coolant Pipes

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

The arrows on the coolant pipes and the coolant hoses must align.

Fig 1: Exploded View Of Coolant Pipes

Courtesy of AUDI OF AMERICA, LLC

Nut
- 10 Nm
Right Front Coolant Pipe
- There are different versions. Refer to the Parts information for the allocation.
- Removing and installing. Refer to RIGHT FRONT COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 10 Nm
Bolt
- 10 Nm
Front Upper Coolant Pipes
- Different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to UPPER COOLANT PIPES, REMOVING AND INSTALLING .
Rear Right Coolant Pipe
- Removing and installing. Refer to RIGHT REAR COOLANT PIPE, REMOVING AND INSTALLING .
O-ring
- Always replace after removing
- Coat with coolant
Bolt
- 10 Nm
Bolt
- 23 Nm
Nut
- 10 Nm
Rear Coolant Pipe
- Removing and installing. Refer to REAR COOLANT PIPE, REMOVING AND INSTALLING .
Bolt
- 10 Nm
Bolt
- 10 Nm
Bolt
- 10 Nm
Left Front Coolant Pipe
- Different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to LEFT FRONT COOLANT PIPE, REMOVING AND INSTALLING .
Nut
- 10 Nm
Left Coolant Pipes
- Different versions. For the correct allocation. Refer to the Parts information.
- Removing and installing. Refer to LEFT COOLANT PIPES, REMOVING AND INSTALLING .
Bolt
- 8 Nm
Bolt
- 8 Nm