Auxiliary Radiator, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2016 Audi S3, 2016 Audi A3, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the noise insulation. Refer to NOISE INSULATION .

-- Remove the left front wheel housing liner. Refer to WHEEL HOUSING LINER .

-- Unclip the air duct -1- in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

NOTE:

Place a cloth underneath to catch any leaking coolant.

Courtesy of AUDI OF AMERICA, LLC

-- Clamp off the coolant hoses -1- with the :3094 .

-- Loosen the clamps and remove the coolant hoses.

-- Free up the coolant hoses from the bracket, to do so open the retainers in direction of -A arrows- and remove in direction of -B arrows-.

-- Remove the nuts -arrows- and remove the auxiliary radiator -1- with the bracket.

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the air duct -1- in direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -4- and remove the auxiliary radiator -2- from the bracket -3- upward.