Coolant Shut-Off Valve -N82-, REMOVING AND INSTALLING: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2016 Audi S3, 2016 Audi A3, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamp -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and push the left air duct pipe slightly to the left.

Version with Secondary Air System:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Press the release buttons on both sides and remove the secondary air injection pipe -2-.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Clamp the coolant hoses on Coolant Shut-Off Valve -N82- with the :3094 .

NOTE:

Place a cloth underneath to catch any leaking coolant.

-- Loosen the hose clamps -1- and remove the coolant hoses.

-- Remove the bolts -arrows- and remove the Coolant Shut-Off Valve -N82-.