Upper Coolant Pipe, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi S3, 2017 Audi RS 3, 2016 Audi S3, 2016 Audi A3, and 2015 Audi S3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the ignition coil with power output stage for cylinder "3". Refer to IGNITION SYSTEM .
-- Release the retainers in direction of -arrows- and remove wiring duct -1- from bracket.
-- Clamp off the coolant hoses -arrows- with the :3094 .
-- Loosen the clamps and remove the coolant hoses.
-- Remove the bolts -1- and remove the upper coolant pipe.