Charge Air Pressure Sensor -G31-, REMOVING AND INSTALLING: Removing
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Depending on the vehicle, there are different components.
-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- Disconnect the connector -3-.
-- Spray the hose on the Charge Air Pressure Sensor - G31- with solvent before disconnecting.
CAUTION:
There is a risk of damaging the charge air pressure sensor by breaking the connection.
- Remove the hose carefully and evenly from the connection.
-- Remove the bolts -2- and the Charge Air Pressure Sensor -G31-.