Camshaft Adjustment Valve 1 -N205-, REMOVING AND INSTALLING: Removing

-- Remove the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Free up the wires -1 and 3-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows- and push the coolant line -2- to the left side.

-- Disconnect the connector -2-.

Fig 1: Identifying Camshaft Adjustment Valve 1 And Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -1- and the Camshaft Adjustment Valve 1 - N205-.