Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

Special Tools And Workshop Equipment Required 

• Puller - Valve Seal:3364 
• Seal Installer - Valve Stem:3365  or (depending on the version/manufacturer of the valve stem seal)
• Fitting Tool:T40376/1  , not illustrated
• Valve Keeper Tool Kit:VAS5161A  with the Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C 
• Engine and Transmission Holder:VAS6095A 
• Cylinder Head Tensioning Device:VAS6419 
• Mounting Sleeve. Refer to Parts Information.