Bearing Bracket, Removing And Installing: Installing

Courtesy of AUDI OF AMERICA, LLC

-- Install the bolts -arrows- and tighten them. Tightening specification -item  ) OVERVIEW - CYLINDER HEAD - Bolt.

-- Coat the holes -arrows- with engine oil.

Courtesy of AUDI OF AMERICA, LLC

-- Check if the adapter sleeve -1- is installed.

Courtesy of AUDI OF AMERICA, LLC

• Carefully connect the bearing bracket without tilting - risk of damage.

-- Attach the bearing mount and install the bolts -1 to 6- all the way by hand.

-- Remove the :T40267  .

-- Tighten the bearing bracket bolts. Refer to BEARING BRACKET - TIGHTENING SPECIFICATIONS AND SEQUENCE .

Installation is performed in reverse order of removal, noting the following:

-- Install the upper timing chain cover. Refer to UPPER TIMING CHAIN COVER, REMOVING AND INSTALLING .

-- After working on the chain drive adapt the chain length. Refer to Vehicle Diagnostic Tester.