Exhaust System, Installing Without Tension

Procedure 

• Align the exhaust system when cold.

-- Loosen the threaded connections for the front clamping sleeve -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Push the exhaust system far enough forward until the pre-load on the retaining loops at the exhaust pipe -a- = 5 mm.

Fig 1: Identifying Tail Pipe Aligning

Courtesy of AUDI OF AMERICA, LLC

-- Install the front clamping sleeve. Refer to Figure.

Tightening Specifications 

• Refer to OVERVIEW - MUFFLER