Parking Brake, Checking

Activating >>T U V mode<< :

• The seat belt is on.
• Rear axle in the one-axle roller test stand
• The engine is off and the ignition is on
• Auto Hold is off
• The front wheel must not be moving
• The rear wheel must rotate for at least 5 seconds non-stop between 2.5 and 9 km/h (2 and 6 mph)

>>T U V mode<< is indicated when the yellow Electric Parking/Hand Brake Malfunction Indicator Lamp -K214- comes on.

-- The yellow electromechanical parking brake symbol with a line through it appears in the instrument cluster. Refer to Owner's Manual, Instruments and Indicator Lamps

Operating the Electromechanical Parking Brake Button -E538- three to four times increases the tension.

Operating the Electromechanical Parking Brake Button -E538- a fifth time releases the electromechanical parking brake.

-- Start the engine and wait approximately 5 seconds until there is enough vacuum.

Ending >>T U V mode<< :

• Front wheels, speed greater than 0 km/h (0 mph)
• Rear wheels, speed less than 2.5 km/h (2 mph) or greater than 9 km/h (6 mph)
• Ignition off