Overview - Instrument Panel Central Tube
- Steering Column
- Removing and installing, refer to STEERING COLUMN, REMOVING AND INSTALLING .
- Bolt
- Quantity: 3
- Tightening specification, refer to OVERVIEW - RELAY CARRIERS, FUSE PANELS AND E-BOXES .
- Bolt
- 20 Nm
- Driver side onlyCAUTION:
There is a risk of malfunctions do to a faulty Ground (GND) connection.
- The counter threaded and contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the ground connection for the knee airbag.
- Nut
- 20 Nm
- Quantity: 2
- Replace after removingCAUTION:
There is a risk of malfunctions do to a faulty GND connection.
- The contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the ground connection for the knee airbag.
- Threaded Pin
- 20 Nm
- Quantity: 2
- Bolt
- 20 Nm
- Crash bolster
- Removing and installing, refer to CRASH BOLSTER, REMOVING AND INSTALLING .
- Bolt
- 20 Nm
- Bracket
- For the vehicle electrical system control module.
- Assembly overview, refer to OVERVIEW - RELAY CARRIERS, FUSE PANELS AND E-BOXES .
- Bracket
- For the control module
- installed depending on version
- Bracket
- For Access/Start Authorization Control Module -J518-
- Assembly overview, refer to OVERVIEW - FRONT DOOR LAMPS .
- Central Tube
- For the instrument panel
- Removing and installing, refer to INSTRUMENT PANEL CENTRAL TUBE, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Support
- For the instrument panel
- Quantity: 2
- Removing and installing, refer to GLOVE COMPARTMENT, REMOVING AND INSTALLING .
- Bolt
- 9 Nm
- Bolts
- 4 Nm
- Bolt
- 20 Nm
- Quantity: 2
- Bolt
- Quantity: 4
- Tightening specification, refer to OVERVIEW - STEERING COLUMN / STEERING COLUMN, REMOVING AND INSTALLING .