Overview - Bumper Cover, A3 Basic From My 2017

Fig 1: Exploded View Of Bumper Cover (A3 Sedan From MY 2017)

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • 2.5 Nm
2. Bumper Cover End Plate
   • Removing and Installing. Refer to BUMPER COVER END PLATE, REMOVING AND INSTALLING, VEHICLES FROM MY 2017 .
3. Center Air Intake Grille
   • Removing and Installing. Refer to CENTER AIR INTAKE GRILLE, REMOVING AND INSTALLING, A3 BASIC FROM MY 2017 .
4. Bumper Cover
   • Removing and Installing. Refer to BUMPER COVER, REMOVING AND INSTALLING .
5. Towing Eye Cover
6. Mount
7. Bolt
   • 4 Nm
8. Mount
   • For the bumper cover
   • To secure the headlamp
   • Overview. Refer to OVERVIEW - FENDER .
9. Bolt
   • Tightening specification OVERVIEW - FENDER .
10. Bolt
    • 4.5 Nm
11. Bolt
    • 2 Nm
12. Intermediate Piece
    • For securing the wheel housing liner
13. Washer Nozzle Cover
    • For the headlamp washer system
    • Removing and Installing. Refer to HEADLAMP WASHER SYSTEM WASHER NOZZLE COVER, REMOVING AND INSTALLING .
14. Air Intake Grille
    • Removing and Installing. Refer to AIR INTAKE GRILLE, REMOVING AND INSTALLING, VEHICLES FROM MY 2017 .
15. Cover Strip
    • Removing and Installing. Refer to COVER STRIP, REMOVING AND INSTALLING .
16. Bolt
    • 4.5 Nm
    • Quantity: 3