Backrest Cover And Cushion, Assembly Overview, Standard Seat

NOTE:

A version with a leather cover is shown in the illustration.

Fig 1: Exploded View Of Backrest Cover And Cushion (Standard Seat)

Courtesy of AUDI OF AMERICA, LLC

1. Cushion Clip
   • For securing cover to upholstery
   • Replace after removing
   • Install at the same location with Upholstery Clip Pliers :VAG1634  .
2. Molding
   • Sewn into cover
   • For attaching the cover to the backrest frame
   • Make sure it fits correctly inside the backrest frame
3. Cover
   • Vehicles with:
     • Fabric
     • Leather
   • Allocation, refer to the Parts information.
   • Covers and cushions, removing and installing, refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
   • Cover and cushion, separating, refer to BACKREST COVER AND CUSHION, SEPARATING .
   • Make sure there are no folds after installing
4. Pocket
   • For side airbag
   • Sewn into cover
5. Backrest Frame
6. Cushion
   • Allocation, refer to the Parts information.
   • Covers and cushions, removing and installing, refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
   • Cover and cushion, separating, refer to BACKREST COVER AND CUSHION, SEPARATING .