Seat Heating Element -Z6- / -Z8-, Removing And Installing, Standard Seat: Procedure
-- Cover and cushion, separating, refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD SEAT .
Fabric Cover
-- Disconnect the wire -3- directly from the old heating element -2-.
The old heating elements remain on the cushion -1- and will be covered over by the new heating element.
Leather Cover
-- Cut the electric wire -3- directly from the old heating element -2-.
The old heating elements remain on the cushion -1- and will be covered over by the new heating element.
Continued Steps for All Cover Versions:
-- Align the new heating elements on the cushion.
-- Remove protective films from the heating elements in succession, taking care not to damage the heating elements.
-- Bond heating elements so that they align with the old heating elements and are free of wrinkles.
-- Route the connecting wires to the individual heating elements in the base of the gaps.