Backrest Cover And Cushion, Removing And Installing: Installing
WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
- Observe all measures when installing the front seat, refer to FRONT SEAT, REMOVING AND INSTALLING .
Install in reverse order of removal. Note the following:
-- Place the side airbag -2- if necessary in the pocket sewn into the cover -1-, engage in the backrest frame and secure.