Backrest Latch Locking Mechanism, Removing And Installing: Removing
-- Open convertible top.
-- Secure the convertible top compartment cover in the "open" position against unintentional closing, to do this the hinge must be pushed in the uppermost deviation point until stop -1- on the brace -2- -arrow-.
-- Remove the front rear panel trim panel, refer to FRONT REAR PANEL TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolts -4-.
-- Remove the backrest latch -3-.
-- Unclip the release cable -1- from the backrest latch and disengage the ends of the cable -2- from the lever.