Sill Panel Seat Side Trim, Removing And Installing: Removing
-- Remove the backrest adjustment hand wheel, refer to BACKREST ADJUSTER, REMOVING AND INSTALLING .
-- Move the front seat all the way to the rear and then into its highest position.
-- Remove the seat height adjustment handle, refer to SEAT HEIGHT ADJUSTER, REMOVING AND INSTALLING .
-- Versions with a storage compartment: Remove the storage compartment, refer to STORAGE COMPARTMENT, REMOVING AND INSTALLING .
-- Remove the expanding rivet -2- from the sill panel seat side trim.
-- Open the clip -3- with a screwdriver.
-- Disengage the rear seat side sill trim -1- from the backrest hinge and the seat pan.
-- Slightly lift the front seat side sill trim, unclip from the bracket -5- and remove forward.
-- Equipment versions with lumbar support: Unclip the cable holder -4- and disconnect the connector from the lumbar support adjustment switch.
-- To remove the bracket -1-, remove the bolts -2- and remove the bracket.