LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2017 >> A3 Premium, 2D Convertible >> Repair and Diagnosis >> Accessories & Equipment >> Seats >> Seat Frames -- (A3 Cabriolet) >> 72 Seat Frames >> Front Seats >> Seat Pan, Disassembling And Assembling >> Front Seat Wire Routing >> Installing Individual Wire

Installing Individual Wire

WARNING:
  • Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
  • Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
  • Observe all measures when installing the front seat, refer to FRONT SEAT, REMOVING AND INSTALLING .

Install In Reverse Order Of Removal. Note The Following: 

-- When bundling and placing individual wires, make sure the wires are not twisted.

NOTE:

When installing, position all cable ties, wire holders and retaining clips in same place.

Make sure the connectors are installed correctly and are secure.

scientia non olet · About LEMON Manuals