Lumbar Support Adjustment Motors -V125- / -V126- / -V129- / -V130-, Removing And Installing: Removing
WARNING:
- Follow all pyrotechnic components safety precautions, refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, disconnecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Remove the front seat, refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Fasten the front seat on the Engine/Transmission Holder - Seat Repair Fixture :VAS6136 , refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove backrest seat cover and cushion, refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
-- Detach electrical harness connectors -1 and 2- at the lumbar support forward/back and height adjustment motors.
WARNING:
Risk of eye injury.
- Wear protective eyewear.
-- Drill out rivet -3-.
-- Disconnect the cable tie for the backrest release cable.
-- Move the lower lumbar support -1- forward, disengage it from the backrest frame -2- -arrows- and remove it.