Backrest Release Trim, Removing And Installing: Removing
-- Pull the operating lever upward in direction of -arrow A-.
-- Push a flat-head screwdriver between the trim and operating lever, as shown in the illustration.
-- Release the right catches in direction of -arrow B-.
-- Hold the operating lever pushed -1-, push a flat-head screwdriver between the trim and operating lever, as shown in the illustration.
-- Release the left catches in direction of -arrow-.
-- Bring the operating lever -1- back into the resting position.
-- Disengage the trim -2- by hand in the direction of the -arrow-, and if necessary push on the opposite side.